Turbulent Channel Flow with an Artificial Two-Dimensional Wall Layer

Turbulent flow of an incompressible fluid in a plane channel with parallel walls is considered. The three-dimensional time-dependent Navier-Stokes equations are solved numerically using the spectral finite-difference method. An artificial force which completely suppresses lateral oscillations of the velocity is introduced in the near-wall zone (10 % of the channel half-width in the neighborhood of each wall). Thus, the three-dimensional flow zone, in which turbulent oscillations can develop, is separated from the wall by a fluid layer. It is found that the elimination of three-dimensionality in the neighborhood of the walls leads to a significant reduction in the drag. However, complete laminarization does not occur. The flow in the stream core remains turbulent and can be interpreted as a turbulent flow in a channel with walls located on the boundary of the two-dimensional layer and traveling at the local mean-flow velocity. The oscillations developing inside the two-dimensional layer, which have significant amplitude, distort the flow only in the adjacent zone. Beyond this zone the distributions of the mean characteristics and the structure of instantaneous fields completely correspond to ordinary turbulent flow in a channel with rigid walls. The results obtained confirm the hypothesis of the unimportance of the no-slip boundary conditions for the fluctuating velocity component in the mechanism of onset and self-maintenance of turbulence in wall flows.     

正交各向异性位势问题边界元法中几乎奇异积分的解析算法

几乎奇异积分的计算困难阻碍了边界元法的工程应用。本文针对二维正交各向异性位势问题边界元法中近边界点的几乎奇异积分,采用分部积分法,导出一种直接的解析计算公式。该解析公式可以精确计算线性单元上的几乎奇异积分。对二次单元,可将其细分为几个线性元,采用该解析公式近似计算其边界积分。当内点离当前积分单元较远时,仍保持常规高斯数值积分模式;而当内点离其较近时,因常规高斯积分结果失效,则采用该解析积分取代高斯数值积分。数值算例证明了该算法的有效性和精确性。二次元计算结果比线性元计算结果更精确。     

Numerical analysis of funnel formation during unsteady fluid outflow from a rotating cylindrical vessel

The main features of the unsteady outflow of a fluid from a cylindrical vessel rotating together with it at a constant angular velocity through a central drain hole in the bottom are studied. The software package STAR-CD tested on the results of experiments with water in the absence of rotation is used. Certain important features of the phenomenon under consideration related with the formation of vortex funnels in the fluid are established. The effect of the main control parameters of the problem, namely, angular velocity, viscosity, initial depth, etc., is analyzed.     

On Free Nonlinear Vibrations of Fluid-Filled Cylindrical Shells with Multiple Natural Frequencies

Nonlinear free vibrations of a cylindrical shell fully filled with a perfect incompressible fluid are studied. The case is examined where two natural frequencies of the shell are close __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 127–138, October 2005     

A divergence-conforming hybridized discontinuous Galerkin method for the incompressible Reynolds-averaged Navier-Stokes equations

We present a hybridized discontinuous Galerkin (HDG) method for the incompressible Reynolds-averaged Navier-Stokes equations coupled with the Spalart-Allmaras one-equation turbulence model. The method extends upon an HDG method recently introduced by Rhebergen and Wells for the incompressible Navier-Stokes equations. With a special choice of velocity and pressure spaces for both element and trace degrees of freedom (DOFs), the method returns pointwise divergence-free mean velocity fields and properly balances momentum and energy. We further examine the use of different polynomial degrees and meshes to see how the order of the scalar eddy viscosity affects the convergence of the mean velocity and pressure fields, specifically for the method of manufactured solutions. As is standard with HDG methods, static condensation can be employed to remove the element DOFs and thus dramatically reduce the global number of DOFs. Numerical results illustrate the effectiveness of the proposed methodology.     

Development of an improved divergence‐free‐condition compensated coupled framework to solve flow problems with time‐varying geometries

In this article a coupled version of the improved divergence‐free‐condition compensated method will be proposed to simulate time‐varying geometries by direct forcing immersed boundary method. The proposed method can be seen as a quasi‐multi‐moment framework due to the fact that the momentum equations are discretized by both cell‐centered and cell‐face velocity. For simulating time‐varying geometries, a semi‐implicit iterative method is proposed for calculating the direct forcing terms. Treatments for suppressing spurious force oscillations, calculating drag/lift forces, and evaluating velocity and pressure for freshly cells will also be addressed. In order to show the applicability and accuracy, analytical as well as benchmark problems will be investigated by the present framework and compared with other numerical and experimental results.     

A high‐order compact finite‐difference lattice Boltzmann method for simulation of steady and unsteady incompressible flows

A high‐order compact finite‐difference lattice Boltzmann method (CFDLBM) is proposed and applied to accurately compute steady and unsteady incompressible flows. Herein, the spatial derivatives in the lattice Boltzmann equation are discretized by using the fourth‐order compact FD scheme, and the temporal term is discretized with the fourth‐order Runge–Kutta scheme to provide an accurate and efficient incompressible flow solver. A high‐order spectral‐type low‐pass compact filter is used to stabilize the numerical solution. An iterative initialization procedure is presented and applied to generate consistent initial conditions for the simulation of unsteady flows. A sensitivity study is also conducted to evaluate the effects of grid size, filtering, and procedure of boundary conditions implementation on accuracy and convergence rate of the solution. The accuracy and efficiency of the proposed solution procedure based on the CFDLBM method are also examined by comparison with the classical LBM for different flow conditions. Two test cases considered herein for validating the results of the incompressible steady flows are a two‐dimensional (2‐D) backward‐facing step and a 2‐D cavity at different Reynolds numbers. Results of these steady solutions computed by the CFDLBM are thoroughly compared with those of a compact FD Navier–Stokes flow solver. Three other test cases, namely, a 2‐D Couette flow, the Taylor's vortex problem, and the doubly periodic shear layers, are simulated to investigate the accuracy of the proposed scheme in solving unsteady incompressible flows. Results obtained for these test cases are in good agreement with the analytical solutions and also with the available numerical and experimental results. The study shows that the present solution methodology is robust, efficient, and accurate for solving steady and unsteady incompressible flow problems even at high Reynolds numbers. Copyright © 2014 John Wiley & Sons, Ltd.     

Exact pressure integrations on submerged bodies in waves using a quadtree adaptive mesh algorithm

The development of an adaptive free surface, mesh cutting, methodology, in order to analytically integrate pressures on varying wet parts of partially submerged surfaces in the presence of waves, is presented. Given a function of free‐surface elevation, the algorithm checks for the intersection of the body with the free surface and, based on user‐defined parameters, modifies the initial mesh, by subdividing the elements where necessary and eliminating others, via a quadtree approach. Redundant sub‐divisions, generated in the quad‐division process, are partially eliminated, but the quadrilateral nature of the elements is always kept. The free‐surface function must be single‐valued and its definition domain simply connected. Hydrostatic and Froude–Krylov forces are computed exactly on each panel by means of analytical formulations, which are derived and presented, based on the theory of linear gravity waves and from applying Green's theorem. Copyright © 2014 John Wiley & Sons, Ltd.     

求解定常不可压Stokes方程的两层罚函数方法

借助于两套有限元网格空间提出了一种求解定常不可压Stokes方程的两层罚函数方法.该方法只需要求解粗网格空间上的Stokes方程和细网格空间上的两个易于求解的罚参数方程（离散后的线性方程组具有相同的对称正定系数矩阵）.收敛性分析表明粗网格空间相对于细网格空间可以选择很小，并且罚参数的选取只与粗网格步长和问题的正则性有关.因此罚参数不必选择很小仍能够得到最优解.最后通过数值算例验证了上述理论结果，并且数值对比可知两层罚函数方法对于求解定常不可压Stokes方程具有很好的效果.     

An accurate pressure–velocity decoupling technique for semi‐implicit rotational projection methods

In this paper, an accurate semi‐implicit rotational projection method is introduced to solve the Navier–Stokes equations for incompressible flow simulations. The accuracy of the fractional step procedure is investigated for the standard finite‐difference method, and the discrete forms are presented with arbitrary orders or accuracy. In contrast to the previous semi‐implicit projection methods, herein, an alternative way is proposed to decouple pressure from the momentum equation by employing the principle form of the pressure Poisson equation. This equation is based on the divergence of the convective terms and incorporates the actual pressure in the simulations. As a result, the accuracy of the method is not affected by the common choice of the pseudo‐pressure in the previous methods. Also, the velocity correction step is redefined, and boundary conditions are introduced accordingly. Several numerical tests are conducted to assess the robustness of the method for second and fourth orders of accuracy. The results are compared with the solutions obtained from a typical high‐resolution fully explicit method and available benchmark reports. Herein, the numerical tests are consisting of simulations for the Taylor–Green vortex, lid‐driven square cavity, and vortex–wall interaction. It is shown that the present method can preserve the order of accuracy for both velocity and pressure fields in second‐order and high‐order simulations. Furthermore, a very good agreement is observed between the results of the present method and benchmark simulations. Copyright © 2016 John Wiley & Sons, Ltd.